(0) Cart
  • No products in the cart.

Boston E-Cat, C-Cat, B-Cat and A-Cat 20 Capacity Gun Safe 6mm Steel ‘FIRE PROOF’

Boston E-Cat, C-Cat, B-Cat and A-Cat 20 Capacity Gun Safe 6mm Steel ‘FIRE PROOF’

$2,699.99

AVAILABLE BY ORDER, Please Contact Us CLICK HERE

Measures 1500mm tall by 762mm  wide by 660mm deep (752 Litre Capacity) & weighs 470Kg.
Holds up to 20 Long Guns
If Out Of Stock Then Please CLICK HERE For Current Price & Availability

$2,699.99

Product Description

Boston E-Cat, C-Cat, B-Cat and A-Cat 20 Capacity Gun Safe 6mm Steel ‘FIRE PROOF’Picture1

NEW 2017 NZ Police Approved Compliance Certification Supplied With Safe

NOTE; These are not held in stock but Direct Shipped from Supplier (subject to availability) – CLICK HERE

The Boston Security 20 Gun safe has a 50mm total wall thickness on all sides featuring our poured DryLight insulation and 2 layers of steel for exceptional fire and security protection.
Outer steel thickness of 11 gauge and inner steel of 16ga for a total steel thickness of 7ga.
Outer steel thickness of 11ga and inner steel thickness of 4ga for a total steel thickness of 9.5mm.

U.L. Residential Security Container (RSC) Burglary Classification

The Boston Security safe is perfect for the closet or an area that requires a shallow gun safe.
The Boston Security sets a standard that other gun safes can’t compare to.
Impressive features include a 6mm steel plate door, DryLight composite insulation, 120 minute fire rating, 8 massive 32mm bolts, U.L. Group II Lock, commercial grade hinges just to name a few.
The Boston Security is sure to exceed your expectations of a E-Cat security safe.
Boston Security Gun Safes use a proprietary fill material called DryLight, which offers exceptional fire Boston Security Internal Temps protection without adding excess weight.
This superior fire protection was confirmed at Intertek, the industry’s leading independent laboratory for gunsafe fire testing.
When analyzing the fire performance of competitive safes, be sure to weigh reports from independent laboratories against unverified factory testing.
During fire testing, Intertek kept our Boston Security Gunsafes in their test oven for two hours.
Within 8 minutes, the furnace temperature was raised to 650°C , and that temperature was maintained for the remainder of the two-hour test.
This method is consistent with the UL-72 fire test curve.
Typical house fires only reach temperatures of 595° C.
A safe is considered to have failed this test if temperatures exceed 177° C anywhere in the safe.
Our safe passed the test as internal temperatures never exceeded 162° C during the two hours of testing.
Paper typically starts to ignite at 232° C.

OPTIONAL Magnetic Motion Sensor Time Out LED GUN SAFE LIGHT BAR – Battery Operated
Magnetic Motion Sensor Time Out LED GUN SAFE Light Bar – Battery Operated     2.2 1Pic
  CLICK HERE 

FEATURES

  • 11 massive 1½” chrome-plated bolts.
  • Spy proof dial and ‘Spoke’ handle
  • Bolt detent system holds bolts in open position.
  • ETL Verified Fire protection of 1200°F for 120 minutes.
  • Proven to maintain interior temperature of less than 350 degrees.
  • Ultra smooth cam driven locking mechanism with increased handle rotation. As an added security feature, handle will disengage under severe attack.
  • Commercial grade, adjustable ball bearing hinges.
  • Available with Left Swing or Right Swing door.
  • 2 Stage Dual fire seals with silicone seal on door jamb and expandable Palusol™ seal on door.
  • U.L. Listed Group II Lock with massive hard plate and two relocking devices.
  • Interior shelves fully upholstered in a pin-dot fabric.
  • Interior shelving can be adjusted to meet your unique storage needs.
  • Interior door panel finished in full pin-dot fabric.
  • Hand-painted high-gloss textured finished
  • Three-Way Bolt work for all Boston Security safes
  • New All-In-One Interiors come with 2 coverplates and 4 side shelves to allow for storage on all sides of safe.

 

* DOOR SPECIFICATIONSBoston E-Cat, C-Cat, B-Cat and A-Cat 20 Capacity Gun Safe 6mm Steel 'FIRE PROOF'

  • 12.7mm steel plate door combined with 25mm DryLight insulation.
  • 8 massive 32mm thick locking bolts to provide superior door security.
  • Three-way bolt work
  • Commercial grade high security exterior hinges for additional security and full access to the elegant interior.
  • Equipped with a U.L. listed group II lock protected by a massive hardplate and internal re-locker
  • Equipped with external relocker for additional security.
  • Bolt detent system holds bolts in the open position preventing damage to bolt work & body.

 

* BODY SPECIFICATIONS

  • Body encloses a proprietary DryLight insulation eliminating the use of gypsum board.
  • 50mm total wall thickness on all sides.
  • Two layers of steel consisting of an outer and inner steel liner for dual security protection.
  • 4 pre-cut anchor holes.
  • Awarded the U.L. Residential Security Container (RSC) burglary classification.

 

* FIRE PROTECTION

  • New Intertek laboratory testing confirms that Boston Security Gun Safes have superior fire protection for two hours at 650ºC.
  • 50mm total wall thickness on all sides featuring our poured DryLight insulation and two layers of steel for exceptional fire and security protection.
  • ETL Verified Fire protection of 650°C for 120 minutes.
  • Designed to maintain an interior temperature of less than 176°C.
  • 2 Stage Dual fire seals with silicone seal on door jamb and expandable Palusol™ seal on door.

 

SPECIFICATIONS

* Dimensions:
* Width: 762 mm
* Height: 1500 mm
* Depth: 660 mm
* Capacity: 752 Litres ,
* Weight: 470kg
* Gun Capacity: 20 Gun

## Manufacturers / Distributors Code ## 051206  ##
Distributor Warranties Apply On All ‘New’ Product, Unless Stated Otherwise

Gun Safe Tips Blog Logo

 

CLICK HERE

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Modern Tea Set