Lock your valuables with this self armed LOUD (110 Decibel) Alarm – Siren Padlock
Can be used as a standard padlock without Siren / Alarm being set
This lock can be used as an Ordinary Padlock unarmed or armed by simply taking out the shackle and inserting it back into the lock the other way round.
When the lock is armed, a single beep will be heard.
Built in movement trigger for alarm function, to emit a 110 decibel alarm when the lock is tampered with, combining locking function with alarming function!
Adopts MCU core procedures, high-tech integrated circuit and digital sensor chip, and powered by 6 button cell batteries – INCLUDED.
HunterCo’s Siren Alarm locks are designed that when the lock is vibrated twice within 5 seconds the alarm will sound.
The 5 second delay allows the lock to be opened by the key without sounding.
The alarm sounds in 10 second intervals.
The alarm (110dB) will keep sounding with constant movement or vibration.
Once stopped the alarm will re-set after 35 seconds.
This Heavy duty innovative padlock is a High Security Multi-purpose ALARM locking device system.
Its uses range far and wide, and the most popular applications seem to be, but not limited to:
Firearm security, Motobikes, Cycles, Bicycles, Bikes, Vehicle Security, Sheds and Garages, Doors, Gates, Caravans, Trailers, Generators, Tool Boxes, Heating Oil Tanks, Fuel Tanks, Boats, Garden Furniture, Equine Security, Stables, Shipping Containers, Retail Shops, Display Cabinets, etc
- 110 Decibel Alarm / Siren
- Heavy Duty Shackle / Lock
- Security Design Keys
- 3 Keys IINCLUDED
- 6 Button Cell Batteries INCLUDED & Replaceable (A76 / LR44)
- Battery Life approximately 2 Years (under normal use)
- Size, 100mm x 73mm x 16mm + 20mm
- Copper Colour for Visual Detection
- Insert key, turn in a clockwise direction and remove shackle
- Replace shackle into lock with groove towards key port (see picture below)
- The lock will “beep”,at this point. Remove the key and the alarm will set after 15 seconds.
To use as an ordinary padlock simply insert the shackle with the groove away from the key port.
If using on moving vehicles or equipment use as an ordinary padlock until stationary then alarm may be set.
To replace the batteries remove the 2 screws in the shackle holes (see picture).
Remove cover and replace the batteries (6xA76/LR44 1.5V).
Be sure to pay attention to polarity and that cover goes on same way it came off.
Batteries should last 2 years under normal operating situations. (6 batteries are included in the padlock)
- 1 x HunterCo Alarm / Siren Padlock
- 3 x SECURITY Keys
- 1 x Set of Batteries (6 x A76/LR44)
## Manufacturers Code ## LOCKAL ##
Distributor Warranties Apply On All ‘New’ Product, Unless Stated Otherwise.